The maths, explained
Measure the wall face and deduct the openings that will not receive masonry. Brick length and height, each increased by the entered mortar joint, create an approximate face module. Divide net wall area by that module, add your waste allowance, and round up to whole bricks. This is a single-leaf face-area estimate, not a bond-by-bond drawing or a structural wall design.
Net area = wall length × height − openings; bricks = ceil(net area ÷ ((brick length + joint) × (brick height + joint)) × (1 + waste / 100))
A worked example
The worked example below uses the calculator’s initial inputs and the same calculation function as the live interface. Replace example amounts with your own records; changing currency does not convert the numbers. Physical reference dimensions are stored in metric units, and the interface can display their imperial equivalents. Rounded display values may differ slightly from the full precision retained in the calculation.
| Your inputs | Editable example — not a market quote |
|---|---|
| Wall length | 6 m |
| Wall height | 2.4 m |
| Openings area | 2 m² |
| Brick length | 190 mm |
| Brick height | 57 mm |
| Mortar joint | 10 mm |
| Order quantity with 10% example waste | 1,018 units |
Assumptions used
The result assumes simple geometry and the dimensions actually entered. Waste, unit price and allowances are editable assumptions, not verified regional market rates. An allowance is not a guarantee: compare the answer with the chosen product, cutting or laying plan, and delivery constraints. Tax is applied to the complete subtotal including contingency in this model; adjust the budget if your applicable tax base differs.
On your side of the Atlantic
Canadian projects often mix metric drawings with imperial products. Confirm the supplier’s units and the applicable GST, HST or PST treatment for your province.
Common mistakes
Confirm actual rather than nominal brick dimensions. Piers, returns, corners, special units and additional leaves need separate takeoffs. A zero net area gives zero bricks; openings larger than the wall are rejected.
Before ordering or tendering, compare at least two scenarios: your base takeoff and a realistic alternative. Keep assumptions with the result so differences are explainable. Save an estimate only on a suitable device. A shared link contains the entered values, so avoid including confidential information. An exported estimate is a snapshot and does not update when a supplier changes a price.
Questions from the jobsite
What does this calculator measure?
What is the first mistake to avoid?
Are the example prices supplier quotes?
Which tax assumptions apply in Canada?
How should I handle waste and contingency?
Can I use the result in a tender or estimate?
Planning estimate only. Not a substitute for a professional quote or local building-code compliance. Verify quantities, tax treatment and contract requirements.
See our methodology →